Home  >  Products  >  Vertical Sump Slurry Pumps
  • 150SV Vertical Sump Semi-Submersible Slurry Pumps

  • 150SV Vertical Sump Semi-Submersible Slurry Pumps

  • 150SV Vertical Sump Semi-Submersible Slurry Pumps

150SV Vertical Sump Semi-Submersible Slurry Pumps

Zidong Pump® ZP(R) series slurry pumps are designed for various sump conditions and can also be used for floating dewatering or other floating pump platforms.
As a cantilever vertical mud pump, the ZP(R) series pumps no underwater bearings or seals; so it can avoid the main failures of bearings and seals;
These vertical slurry pumps can be fully elastic lining or hard metal(27% chrome alloy)

Product Description

Description:

150SV-ZP(R) Vertical Sump Pumps are designed for every other tank,

pit or hole-in-the-ground slurry handling situation,

ZP150SV pumps are available in various standard lengths to suit common sump depths,

for very deep sumps or where high shaft speeds limit the length of the pump,

a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up to 2 meters.

150SV-ZP(R) Vertical Slurry Pump is available in a wide range of popular sizes to suit most pumping applications.

Thousands of these pumps are proving their reliability and efficiency worldwide in Minerals processing,

Coal preparation, Chemical processing, Effluent handling, Sand and gravel and almost every other tank,

pit or hole-in-the ground slurry handling situation.

 

Model Meaning:150SV-ZP(R)

ZP: Zidong Pump ® Metal Vertical Sump Slurry Pump

R: Rubber Liner

150: Discharge Diameter in mm

SV: Frame Type

Model

Matching power

(kw)

Capacity

(m3/h)

Head

(m)

Speed

(r/min)

Eff.

η (%)

Impeller dia.

(mm)

Max.particles

(mm)

Weight

(kg)

150SV-ZP(R) 11-110 108-576 8.5-40 500-1000 52 450 45 1737

 

Structure features:

1. Cantilever design without submerged bearings or shaft seals;

2. Wet components are available in A05 high chrome alloy and elastomer (rubber);

3. The screened inlets and large impeller passages reduce the risk of blockages;

4. Available in a pre-fabricated conical sump with quick clean facilities;

5. Replaceable strainers allows for easy maintenance;

6. Simple installation and easy maintenance.

7. Anti-wear, anti-corrosion, which let the pumps service more longer;

8. No priming required;

 

Design features:

Less wear, less corrosion

Wetted components are available in a wide range of alloys and elastomers.

Zidong selects the optimum combination of materials for maximum resistance

to wear in virtually any industrial application, including those demanding both

abrasion and corrosion resistance, and where larger particles or high density slurries are encountered.

• Abrasion resistant Ultra chrome® A05 alloy.

• Abrasion/corrosion-resistant Hyper chrome® A49 alloy.

• Corrosion-resistant stainless steels.

• Natural and synthetic elastomer.

No submerged bearing failures

The robust cantilever shaft avoids the need for lower submerged bearings

which are often the source of premature bearing failure.

• Heavy duty roller bearings, above mounting plate.

• No submerged bearings.

• Labyrinth/flinger bearing protection.

• Rigid, large diameter shaft.

No shaft sealing problems

The vertical cantilever design requires no shaft seal.

No priming required.

The top and bottom inlet design is ideally suited for “snore” conditions.

Less risk of blocking

The screened inlets and large impeller passages reduce the risk of blockages.

Zero ancillary water costs

The vertical cantilever design with no gland or submerged bearings avoids the need for expensive gland or bearing flushing water

150SV Vertical Sump Semi-Submersible Slurry Pumps

Metal Lined Vertical   Slurry Pump Rubber Lined   Vertical Slurry Pump
No Parts name Materials No Parts name Materials
1 Shaft 45 High Strength Steel 1 Shaft 45 High   Strength Steel
2 Bearing China Brand or SKF;   NSK 2 Bearing China Brand or SKF;   NSK
3 Bearing Housing HT250 3 Bearing Housing HT250
4 Shaft spacer Carbon Steel or   Stainless Steel 4 Shaft spacer Carbon Steel or   Stainless Steel
5 Bearing China Brand or SKF;   NSK 5 Bearing China Brand or SKF;   NSK
6 Shim Carbon Steel or   Stainless Steel 6 Shim Carbon Steel
7 Column Carbon Steel or   Stainless Steel 7 Column Rubber coated Carbon   Steel
8 Strainer Cast Iron 8 Strainer Natural Rubber
9 Back liner Ultra Chrome Alloy 9 Back liner Anti-abrasive Rubber
10 Impeller Ultra Chrome Alloy 10 Impeller Anti-abrasive Rubber
11 Pump casing Ultra Chrome Alloy 11 Pump casing Anti-abrasive Rubber
12 Lower strainer Cast Iron 12 Lower strainer Natural Rubber
13 Discharge pipe Carbon Steel or   Stainless Steel 13 Discharge pipe Rubber coated Carbon   Steel
14 Flushing pipe Carbon steel 14 Flushing pipe Carbon steel
15 Coupling 45# Steel 15 Coupling 45# Steel
16 Middle supporting   parts Carbon Steel or Stainless   Steel 16 Middle supporting   parts Carbon Steel

 

Applications:

The rugged ZIDONG ZP/ZPR vertical slurry pumps are available in a wide range

of popular sizes to suit most pumping applications.

These pumps are proving their reliability and efficiency worldwide in:

• Minerals processing

• Coal preparation

• Chemical processing

• Effluent handling

• Sand and gravel

• Abrasive and/or corrosive slurries

• Large particle sizes

• High density slurries

• Heavy duties demanding cantilever shafts

And almost every other tank, pit or hole-in-the-ground slurry handling situation.

 

 

 

Tags

Related Products

Request a Quote

Chat with Us