ZIDONG ZP/ZPR vertical sewage pit spinal sump slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. The heavy duty cantilever design makes the ZIDONG ZP/ZPR sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Overview
Capacity range: 17-1300 m3/h
Head range: 4- 40m
Speed range: 350-2200rpm
Power range: 15-200kw
ZP series slurry pumps are designed for various sump conditions and can also be used for
floating dewatering or other floating pump platforms.
As a cantilever vertical mud pump, the ZP series pumps no underwater bearings or seals;
so it can avoid the main failures of bearings and seals;
these vertical slurry pumps can be fully elastic lining or hard metal(27% chrome alloy) assembly;
this vertical pump not only has excellent wear life, but also has high operation efficiency,
which finally reduces the operation cost.
Pump with extension 2m suction pipe Pump with extensionShaft in 1.8m
Features
1. Cantilever design without submerged bearings or shaft seals;
2. Wet components are available in A05 high chrome alloys and elastomers (rubber);
3. The screened inlets and large impeller passages reduce the risk of blockages
4. Available in a pre-fabricated conical sump with quick clean facilities;
5. Replaceable strainers allows for easy maintenance;
6. Simple installation and easy maintenance.
7. Anti-wear, anti-corrosion, which let the pumps service more longer;
8. No priming required.
Model Specification
▲Model Meaning
ZP-40PV ZP: Zidong Brand Submersible Sump Pump
40: Discharge Diameter in mm
PV: Frame Type
ZP/ ZPR CLEAR WATER PERFORMANCE | ||||||||
MODEL | MAX. POWER (KW) |
MATERIAL | Q CAPACITY | HEAD H(m) |
SPEED n(r/min) |
MAX.Eff η% |
||
LINER | IMPEL | (m 3 /h) | (I/S) | |||||
ZP-40PV | 15 | M | M or RU | 19.44~43.2 | 5.4~12 | 4.5~28.5 | 1000~2200 | 40 |
ZPR-40PV | 15 | RU | RU | 17.28~39.6 | 4.8~11 | 4~26 | 1000~2200 | 40 |
ZP-65QV | 30 | M | RU | 23.4~111 | 6.5~30.8 | 5~29.5 | 700~1500 | 50 |
ZP-65QV | 30 | M | M | 19.8~93.06 | 5.5~25.85 | 5~29.5 | 700~1500 | 40 |
ZP-65QV | 30 | M | M | 23.4~87.12 | 6.75~24.2 | 5.5~31.5 | 700~1500 | 58 |
ZPR-65QV | 30 | RU | RU | 22.5~105 | 6.25~29.15 | 5.5~31.5 | 700~1500 | 51 |
ZP-65QV | 30 | M | M | 18.9~89.1 | 5.25~24.75 | 5~28 | 700~1500 | 35 |
ZP-100RV | 75 | M | RU | 56.7~221.76 | 15.75~61.9 | 4.5~34.5 | 500~1200 | 56 |
ZP-100RV | 75 | RU | RU | 64.8~285 | 18~79.2 | 7.5~36 | 600~1200 | 62 |
ZPR-100RV | 75 | M | M | 54~289 | 15~80.3 | 5~35 | 500~1200 | 56 |
ZP-100RV | 75 | M | M | 54~237.6 | 15~66 | 6~30 | 600~1200 | 40 |
ZP-150SV | 110 | M | RU | 108~479.16 | 30~133.1 | 8.5~40 | 500~1000 | 52 |
ZP-200SV | 110 | M | M or RU | 189~891 | 52.5~247.5 | 6.5~37 | 400~850 | 64 |
ZP-250TV | 200 | M | M or RU | 261~1089 | 72.5~302.5 | 7.5~33.5 | 400~750 | 60 |
ZP-300TV | 200 | M | RU | 288~1267 | 80~352 | 6.5~33 | 350~700 | 50 |
Structure Drawing
ZP(R) Vertical Sewage Pit Spinal Sump Slurry Pump
Performance Curve
Applications
Mining and mineral processing process and spillage sump duties
Mill scale pumping in steel mills
Sugar cane processing
Non-contact induced-flow pumping of impact-sensitive media like carbon transfer or froth
(when provided with an optional recessed vortex impeller)
★ Minerals processing | ★ Coal preparation | ★ Chemical processing |
★ Effluent handling | ★ Sand and gravel | ★ Abrasive and/or corrosive slurries |
★ Large particle sizes | ★ High density slurries | ★ Heavy duties demanding cantilever shafts |
Request a Quote