ZPR Vertical Rubber Slurry Pumps with extension pipe

Zidong Pump® ZPR Vertical Rubber Slurry Pumps are designed to transport slurries in the sump.  It mainly used for handling high concentration, high corrosive slurries without shape edge and lighter in weight. The length of shaft can be customized according different work conditions, Besides, Optional recessed impeller and suction agitator are also available.

315kw electric heavy duty submersible sand slurry agitator pump

ZJQ submersible slurry pump is hydraulic machinery, the motor and the pump of which are coaxially working submerged in medium . The wetted parts of the pump are made of high chromium wearable alloy , so the pump has good wear resistance and large flowing passage. It is applicable for conveying medium such as sludge, ore slurry, coal slurry, sandstones containing big solid particles.

110KW Electric Submersible Sludge Slurry Pump

110kw submersible slurry pump of the wetted parts of the pump are made of high chromium wearable alloy , so the pump has good wear resistance and large flowing passage. It can be equipped with high pressure water-jet ring, suitable for loose sand extraction, which can greatly improve the effeciency of sand output with lowest budget.

40PV Heavy Duty Cantilever Sump Pump With Extension Shaft

Vertical Sump Pumps are available in various standard lengths to suit sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe or shaft can be fitted to the bottom inlet to extend the depth of the pump by up to 2 meters. Pumping is maintained even when the top inlet is not submerged.

Wear Resistant Polyurethane Spare Parts for Slurry Pumps

Polyurethane Elastomer ZU01 is an erosion resistant material that performs well in elastomer applications where ‘tramp’ is a problem. This is attributed to the high tear and tensile strength of ZU01. It also has excellent resistance to oils and solvents, except ketones and esters. Polyurethanes are susceptible to hydrolysis attack in hot and/or acidic conditions over time.

Wear resistant hard metal slurry pump parts

ZIDONG PUMP hard metal slurry pump and the wear parts are made in 27% high chrome alloy material, which designed for handling highly abrasive slurries with sharp particles, like mining ore, tailings, sand sludge and coal ash. ZIDONG slurry pump wear parts can be interchangeable with international famous brand, which should be your best choice due to high quality standard and cost-effective prices.

6inch tunnel shield sand gravel pump

ZIDONG PUMP® 8x6E-ZG model is horizontal single-casing gravel pump with wide channel to transfer sand, slurries or gravels with big particle size. The wet parts are made of Ni-hard and high-Chromium alloys resistance material to ensure longer service life.

100RV Semi-submersed vertical hole-in-the ground slurry handling pump

100RV-SP Vertical Slurry Pump is designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Suited for applications requiring greater reliability and durability than conventional vertical process pumps can offer. It is mainly used for pumping the slurries with high abrasive, strong corrosion and high concentration liquids contain suspended solid particles.